The post is based on utilize Mellanox 4036 build-in subnet manager and only install IB driver 1.8.2.4 on vSphere 5.5/6.0
I used Solaris 11.2 express for ZFS platform. Then use the following configured IB interface.
IPoIB
dladm show-ib
dladm show-phys
dladm show-part
dladm create-part -l net3 -P 0x8001 p8001.ib1 (defined in 4036 subnet manager)
dladm show-
ipadm create-ip p8001.ib1
ipadm create-addr -a 10.x.x.x/24 p8001.ib1/ipv4 (iSCSI interface)
I always prefer GUI for easy management, so...
IB, Napp-it and SRP![]()
I used Solaris 11.2 express for ZFS platform. Then use the following configured IB interface.
IPoIB
dladm show-ib
dladm show-phys
dladm show-part
dladm create-part -l net3 -P 0x8001 p8001.ib1 (defined in 4036 subnet manager)
dladm show-
ipadm create-ip p8001.ib1
ipadm create-addr -a 10.x.x.x/24 p8001.ib1/ipv4 (iSCSI interface)
I always prefer GUI for easy management, so...
IB, Napp-it and SRP